Fluorometer

This equipment is able to perform two measurement modes: Fluorescence and absorbance; the principle of operation of the instrument is based on the measurement of light signals by two fluorescence channels for nucleic acid, quantification of proteins in a single detection. The light signal that affects the detectors is converted by high gain amplifiers to voltage signals that are in turn digitized and stored in memories for further processing.

In the fluorescence measurement, a fluorescent lamp emits ultraviolet light (365nm) that hits and excites the sample. The resulting signal is picked up by the detectors. Fluorescence measurement uses internal standards to consider the references 0.0 and 100.0 when reading strips. A value of 0.0 refers to the fluorescence of 10 L of water and a value of 100.0 refers to the fluorescence of 10 L of a 1:10 dilution of 4-methylumbeliferone of concentration 4.7x10-5 M. This equipment can store a maximum of 1,000 data and output data per USB port.

 
 
 
 
 
 

Our Best Selling Fluorometer

A fluorometer measures fluorescence parameters and their intensity and wavelength distribution of the emission spectrum after excitation by a certain spectrum of light. Applications include chemistry/biochemistry, medicine, environmental monitoring. That means they're used to measure chlorophyll fluorescence to investigate plant physiology. These are key devices in any biological laboratory, especially for research. That's why we present you with this high-tech device, to turn your laboratory into a reliable company.YR412-A is your solution, since it is able to measure the absorbance of all the ingredients (such as DNA, RNA, oligos, etc.) of the sample at 260 nm, but keep in mind because that can make the reading inaccurate. The fluorometer measures the fluorescence intensity of the fluorescent reagent, which is combined with the target molecule to read the sample concentration. In general, the reading is lower than that of the Nano series products, but it is much more accurate. The sensitivity of Nano series products is higher than 5 ng/ul, while the fluorometer measures 0.5 pg/ul to measure the DNA concentration. It is important and necessary for most applications to read the lowest and most accurate sample concentration. With the fluorometer YR412-A with the quantification kit, you can measure the sample concentration quickly, sensitively and accurately.

Analysis of the best Fluorometer for your laboratory

Fluorometer vs. Spectrophotometer

A fluorometer is a device that enables analysis, identification, and quantification of chemicals with molecules...

 
 

Fluorometer: care and maintenance

It has a range of interesting applications including chemistry, biochemistry, medicine, environmental monitoring, being used...

 
 

Fluorometer for a laboratory: function

This equipment has as functionality measure the absorbance of all ingredients in the sample at 260nm, but to be precise...

 
 

Fluorometer models on sale

KALSTEIN UPDATED

Guides to becoming a Fluorometer expert

There are countless models, so it is normal that you do not know which Fluorometer to buy to meet your needs. At Kalstein, we evaluate you to find what you're looking for.

Fluorometers: Recommendations and care

A fluorometer is a laboratory instrument that enables the analysis, identification, and quantification of...

Differences between fluorometers and spectrofluorometers?

There are two general instruments for measuring fluorescence, fluorometers and spectrofluorometers...

Frequently Asked Questions about Fluorometer

To know the price of the Fluorometer we invite you to send us an email with your request through the contact form.

The delivery time of your Kalstein product will depend on the following: 

  1. If the equipment of your interest is in stock or if it must be manufactured. 
  2. The type of freight you have chosen may be either air or sea.
  • Equipment in stock:  

โ€“ Delivery Time (Air): 15-30 days 

โ€“ Delivery Time (Maritime): 45-60 days. 

  • Equipment not in stock:  

โ€“ Delivery Time (Air): 30-60 days 

โ€“ Delivery Time (Maritime): 60-90 days. 

You can purchase through: 

  1. By email:โ€ฏsales@kalstein.eu 
  2. By phone:โ€ฏ+33 (0) 1 78 95 87 02
  3. E-commerce: Via Kalstein's official website in your country. 
All Kalstein equipment has a 1-year warranty against manufacturing defects. The warranty does not cover damage caused by poor installation or operation by the user, transport defects or by uses other than those specified by the manufacturer. Warranty excludes electrical or consumable parts. For more information visit our โ€œterms and conditionsโ€ by clicking HERE

At Kalstein, we provide our customers with induction and technical support through new online methods. You can visit our induction videos, technical assistance and guidance provided by a Kalstein team through our YouTube channel (Kalstein English). HERE

Of course, you can request a quote for the Kalstein team of your interest, directly from our official website. Once you have identified your preferred model, click HERE

Send us a direct message and one of our agents will contact you

Thank you for your message. We will contact you shortly - sit and enjoy!

Failed to send message!

PARIS – FRANCE

Company headquarters

2 rue Jean Lantier, 75001, Paris – France.
(+33) 1 78 95 87 89(+33) 7 60 83 92 83

sales@kalstein.eu

LOCATIONS

We are always close.



FACILITIES

Methods of payment and shipping



Follow our activity on social networks

Stay informed with all current news of the sector.


Send a message
Scan the code
Hello
What can we help you?